Questions, answered
Can't find yours? Email us at support@stickmoto.com — real humans, usually same day.
No. We use air-release automotive vinyl with acrylic adhesive — the same material wrap shops use. It bonds firmly but peels off clean with a little heat from a hair dryer, leaving zero residue on factory paint.
Every product is printed on 7-year outdoor-rated cast vinyl and UV-laminated. In real-world terms: years of sun, rain, snow and weekly car washes before you see any fading.
Yes — that's the point. Every order ships with transfer tape and a picture guide. Small stickers take 5 minutes; full side graphics take about 30–40 with a friend and the included squeegee.
Absolutely. Hit the Custom Studio page, describe your idea, and we send you a quote and a digital proof within 48 hours. Custom work starts at $15.
Orders over $40 ship free, worldwide. Under that it's a flat $4.99. Everything is cut fresh and dispatched within 48 hours with a tracking number.
Any smooth, clean surface: painted body panels, glass, plastic trim, laptops, toolboxes, fridges. Avoid rubber seals and heavily textured plastic.
Clean with isopropyl alcohol, position with masking tape hinges, peel the backing gradually and squeegee from the center out. Full picture guide included in every order — plan 30–40 minutes and grab a friend.
Yes — wait 48 hours after application, then automatic and pressure washes are fine. Keep the lance at least 30 cm from edges.
Warm it with a hair dryer for 30 seconds and peel slowly at a sharp angle. Any leftover tack wipes off with isopropyl alcohol.
We ship worldwide. Orders over $40 ship free; under that it's a flat $4.99. Every parcel gets a tracking number within 48 hours of ordering.
Photo the damage and email us within 14 days — we reprint and reship free, no return needed. See the Refund Policy for details.
Still stuck?
Send us your question — or if it's about a custom design, start a brief and we'll figure it out together.